2005 GTO Electronics

By admin, 5 August, 2005
Topics

Unlocking

Press unlock button once for left door. Press and hold for .5 seconds for both or press twice. Turn signals flash twice, and horn chrips twice. If chrips 5 times then there is a problem with the door lock. If lock system is overloaded, power supply is cut for 30 seconds. If they flash three times (the lights) when pressing unlock, then an attempted break-in has occurred (turn ignition on, look at trip computer display for the ALARM ACTIVATED message. They will show until the trip computer MODE button is pressed).

To unlock inside, pull up on knob. To lock, press knob. Drivers door will unlock and lock both. When in (D) with Autos, the doors will auto lock.

To turn off alarm, turn key in ignition to ON.

Trunk release: There is one in the glove compartment and one under head rest on passenger's side rear seat, and one in the trunk (just incase you lock yourself in).

Sensors

The air intake sensor is now incorporated into the mass air flow sensor on the ls2's

PCM

To reset the PCM, disconnect the negative battery over night (probably 5 - 10 minutes will work)

The PCM is located at D/S fenderwell right under the hood, the silver box with 3 plugs.